2SA2183 2006-11-16 1 toshiba transistor silicon pnp epitaxial type 2SA2183 high current switching applications ? low collector-emitter saturation : v ce(sat) = ? 1.0 v max absolute maximum ratings (ta = 25c) characteristics symbol rating unit collector-base voltage v cbo ? 60 v collector-emitter voltage v ceo ? 60 v emitter-base voltage v ebo ? 7 v dc i c ? 5.0 a collector current pulse i cp ? 8.0 a base current i b ? 0.5 a ta = 25c 2 w collector power dissipation tc = 25c p c 20 w junction temperature t j 150 c storage temperature range t stg ? 55 to 150 c note: using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause th is product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/vol tage, etc.) are within the absolute maximum ratings. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/derating concept and methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). unit: mm jedec D jeita sc-67 toshiba 2-10u1a weight: 1.7 g (typ.) 1 : base 2 : collector 3 : emitter
2SA2183 2006-11-16 2 electrical characteristics (ta = 25c) characteristics symbol test condition min typ. max unit collector cut-off current i cbo v cb = ? 60 v, i e = 0 D D ? 100 na emitter cut-off current i ebo v eb = ? 7 v, i c = 0 D D ? 100 na collector-emitter breakdown voltage v (br) ceo i c = ? 10 ma, i b = 0 ? 60 D D v h fe (1) v ce = ? 2 v, i c = ? 0.5 a 200 D 500 dc current gain h fe (2) v ce = ? 2 v, i c = ? 1.6 a 100 D D collector emitter saturation voltage v ce (sat) i c = ? 1.6 a, i b = ? 53 ma D D ? 1.0 v base-emitter saturation voltage v be (sat) i c = ? 1.6 a, i b = ? 53 ma D D ? 1.5 v transition frequency f t v ce = ? 10 v, i c = ? 0.5 a D 170 D mh z collector output capacitance c ob v cb = ? 10 v, i e = 0, f = 1 mhz D 38 D pf rise time t r D 100 D storage time t stg D 300 D switching time fall time t f see figure 1 circuit diagram vcc P ? 30v,rl=18.75 i b1 = ? 53 ma, i b2 = 53 ma, D 60 D ns figure 1 switching time test circuit & timing chart duty cycle 1% marking ib1 20 s ib2 ib1 ib2 input output rl vcc lot no. a line indicates lead (pb)-free package or lead (pb)-free finish. 2SA2183 part no. (or abbreviation code)
2SA2183 2006-11-16 3 collector current i c (a) collector-emitter voltage v ce (v) i c ? v ce collector current ? i c (a) h fe ? i c dc current gain h fe base ? emitter saturation voltage ? v be (sat) (v) collector current ? i c (a) v be (sat) ? i c i c ? v be collector current i c (a) base-emitter voltage v be (v) 0 0 ? 4 ? 4 ? 6 ? 8 ? 2 ? 6 0.001 10 10 0.1 1 1 0.01 tc = 100 c ? 55 25 0 ? 55 25 tc = 100c 0 ? 0.4 ? 0.8 ? 1.2 ? 6 common emitter v ce = ? 2 v i b = ? 5ma common emitter tc = 25 10 0.001 100 1000 0.01 0.1 1 10 ? 10ma common emitter v ce = ? 2 v common emitter i c /i b = 30 0.1 ? 55 tc = 100c 25 ? 20ma ? 50ma ? 200ma ? 400ma ? 300ma ? 500ma ? 8 ? 10 ? 1.6 ? 2 ? 4 ? 2 ? 8 ? 2 ? 10 ? 100ma collector current ? i c (a) v ce (sat) ? i c collector-emitter saturation voltage ? v ce (sat) (v) 10 0.01 0.001 tc = 100 c ? 55 25 0.01 1 10 1 common emitter i c /i b = 30 0.1 0.1 c ob ? v cb collector output capacitance c ob (pf) collector-base voltage ? v cb (v) 10 0.1 100 1 10 i e = 0 f = 1mh z tc = 25 1000 100
2SA2183 2006-11-16 4 ambient temperature ta (c) p c ? ta collector power dissipation p c (w) 0 0 16 4 12 20 20 100 120 160 tc = ta infinite heat sink no heat sink 24 40 60 80 140 0.1 0.001 100 1 0.01 0.1 1 1000 0.1 1 1 10 10 100 1 ms* 10 ms* v ceo max 100 s* 8 10 100 10 100 ms* r th ? t w pulse width t w (s) collector-emitter voltage ? v ce (v) safe operating area collector current ? i c (a) curves should be applied in thermal limited area. (single nonrepetitive pulse) tc = 25 infinite heat sink transient thermal impedance r th (c/w) *: single pulse tc = 25c curves must be derated linearly with increase in temperature. i c max (pulse)* dc operation tc = 25 c i c max (continuous)
2SA2183 2006-11-16 5 restrictions on product use 20070701-en ? the information contained herein is subject to change without notice. ? toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity a nd vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshib a products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconduct or devices,? or ?toshiba semiconductor reliability handbook? etc. ? the toshiba products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuri ng equipment, industrial robotics, domestic appliances, etc.).these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. unintended usage of toshiba products listed in his document shall be made at the customer?s own risk. ? the products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. ? the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba for any infringement s of patents or other rights of the third parties which may result from its use. no license is granted by implic ation or otherwise under any patents or other rights of toshiba or the third parties. ? please contact your sales representative for product- by-product details in this document regarding rohs compatibility. please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
|
